TM100 Transponder Key Programmer Description

In order to reduce the customer's cost of using TM100 FULL version,FLY company has especially introduced the following three different TM100  FULL VERSIONS:

1.TM100 FULL Version Six Months Permission Period :$550 USD

2.TM100 FULL Version One Year Permission Period : $850 USD

3.TM100 FULL Version Two Year Permission Period :$1500 USD

 

What is "TM100 FULL Version Six Months Permission Period version" ?

TM100 FULL Version Six Months Permission Period has completely the same hardware and software as TM100 FULL version, but its usage time is limited to six months,if you still want to use it after six months, you need to do the payment again.
 

 

Our genuine TM100 has already updated to V3.26 , COPY version TM100 is V1.45 .

The old version run short of many functions and can’t upgrade through INTERNET . 

The TM100 will be locked and can’t be used if you try to upgrade the copy version TM100 .Please discretely  choose to buy.

 

TM100 Transponder Key Programmer

2014 New Release TM100 Transponder Key Programmer has all Original Tango Key Programmer functions and  can do BMW CAS4.

TM100 programmer is a new generation of transponder programmer which is developed to cover, read, write and generate the latest transponders used in the latest vehicle immobilizer technologies. New function for reading the Kilometers, VIN and transponder type for all BMW keys was added to the BMW software module! Immo pin code is also displayed for some car models. With this programmer you can generate images for many different original transponders like Philips ID33, Philips Crypto for different ID’s and Texas crypto!

After generating a new transponder with TM100 Programmer, you will not need any additional diagnostic equipment to program the generated transponder to the car! It will start the car directly! You only have to write the new file back into the immobilizer system!.

 

How to add the new modules for TM100 Key Programmer ?

 

2015-5-14 mTM100 4D& ID46 Cloning Machine is already available!
                                                
TM100 4D and ID46 copying machine, the operation is simple with TM100, needed a TM100 software.
 

How to clone TIRIS 4D:
1.Select Tools, Clone, Tiris 4D;
2.Connect TM100 key cloner to PC;
3.Put original key into coil of TM100 key programmer to decode;
4.If decode success, put YS01/TPX2/EH2 transponder into coil of TM100 key programmer;

How to clone HITAG2:
1.Select Tools, Clone, PCF7936;
2.Collect signature data: put sniffer antenna of TM100 key cloner near ignition, turn ignition on by original key.If collect success, red LED will blink once. If not, collect data again.
3.Connect TM100 key cloner to PC;
4.Put original key into coil of TM100 key programmer to decode;
5.If decode success, put YS21/GMT46 transponder into coil of TM100 key programmer;



TM100 ID46/4D copy box support chip list:  
 

                                                 
      ID46 copy chip list : CN3/ TPX4/ GMT 46                                                        
      4D copy chip list : CN1/ CN2/ TPX2/ EH2/ Common 4D
                                                 

2016-1-19 V3.26 released:
1. Add keymaker for Nissan TEANA as MY2012. Parts: BCM, IC: Freescale 9S12, Transponder: PCF7952;
2. Add keymaker for Chevrolet Captiva, Silverado as MY2011. Parts: Immobilizer Box, IC: Freescale 9S08, Transponder: PCF7936;
3. Add keymaker for Mitsubishi L200, ASX, Mirage. Parts: EATCS, IC: EEPROM 25320, Transponder: PCF7936;
4. Fix bug: Dodge Dakota dump unknown version;
5. Add function for BMW CAS4+ save ISK;
6. Improve online activation procedure. Activation only within 10 days remainn;

How to save ISK for BMW:
Select keymaker for BMW CAS4+ adding key. After original key decoded, TM100 will save 16-byte ISK for you. If the same car lost all keys, you can use the saved ISK to do all key lost without reading ISK from DME;
 
2015-12-2 V3.24 released:
1. Add function: disable key at keymaker for new model Porsche;
2. Add function: explorer key at keymaker for new model Porsche;
3. Fix bug: reading UMACFG of PCF7953;
 
2015-11-27 V3.22 released:
1. Add keymaker for Porsche Cayenne, Cayman, Macan as MY2014. Parts: BCM, IC: 9S12XEP100, Transponder: PCF7953;
2. Add keymaker for Ford Focus as MY2014. Parts: PCM, IC: 95320, Transponder: TIRIS DST80;
3. Add keymaker for Iveco Daily as MY2012. IC: 95640, Transponder: Hitag2;
4. Add function: make VAG dealer key by 7-byte CS;
5. Add function: edit ID46 IDE(GMT46, TPX4, CN3);

How to make VAG dealer key by 7-byte CS:

1. Select TPReader, click "MEGAMOS 48", click button "Dealer key by 7-byte CS";
2. Input 7-byte component security, select brand, put new key into coil;
3. Click button "Make dealer key";

How to edit ID46 IDE:
1. Select TPReader, click "PCF7936";
2. Input 4-byte IDE at P0, click button "Write";

 

2015-11-4 V3.20 released
1. Revised BMW CAS4 + flash back problems;
2. Revised open MEDC7 window toolbar right problem, and join the operation hints;
3. Revised version of the firmware upgrade but no upgrade problem;
4. Revised some PCF 7936 chip Bugs, can not read all data;
Notes:
This version includes firmware 1 update. Please DO NOT disconnect PC with TM100 while updating;
 
2015-10-30 V3.18 released
No.1. Add functions:
1. Increase the 47 chip type automatic detection function support;
2. An increase of 7930, 7931, 7935, segmentation function (40, 41, 42, 44, 45, 73);
3. Increase PCF7953 segment information;
4. Add new 46 chip testing functions;
5. Add new T5 detection;
6. Increased testing new 4D (60, 70, 83) chip prompt function;
7. Optimization software interface, support window to maximize;
8. The wiring diagram, security box, according to the drawing into a web page directly without having to download large help files, easy to use;

No.2. Correct the following:
1, modify the bug PCF7936 cannot read data;
2, the correction of the BMW key PCF7942/44 can identify, jump without reaction of bugs;
3, fixed a Toyota ID67 ID68 chip identification instead of bugs;
4, fixed writing start page, key information display dislocation of bug;
5, fixed display into a special chip TP23 TP24 error;
6, revised if you don’t put the chip, the next undetectable chip bug solution;
7, revised PCF7953 block can’t read the EEPROM bug;
Notes:
This version includes firmware 1 update. Please DO NOT disconnect PC with TM100 while updating;
 
2015-10-23 V3.16 released
1. ID46 transponder autodetect
I. Add TPReader:46 chip type reading;
II. Add TPReader:GM and GM SMART KEY reading;

2. ID4D and ID4E transponder autodetect
I. Add TPReader:67 and 68 reading,calculate password;
II. Add TPReader:69、6A、6B、B9 reading,calculate password;
III. Add TPReader:60、61、62、63、64、65、66 reading,car model reading;
IV. Add TPReader:70、71、72、82、83 reading, car model reading;
V. Add TPReader:BMW key reading, detail information reading(VIN, Mech.code, etc);

3. ID48 transponder autodetect
I. Add TPReader:Megamos 48 reading,type reading and car model reading;

4. ID8C transponder autodetect
I. Add TPReader:8C reading,add Mazda car model reading;

5. ID8A and H transponder autodetect
I. Add TPReader:ID8A and H chip reading;

6.Software UI(user interface) upgrade
I.Add operation instruction and attention items for some cars;
II.Add "immo box location map" and "wiring diagram" on main menu, (download the relative CHM from installation items );

Notes:
This version includes firmware 1 update. Please DO NOT disconnect PC with TM100 while updating.

 

2015-9-1 V3.15 released:
1. New software view;
2. Bugs fix;
Notes:
This version includes firmware 1 update. Please DO NOT disconnect PC with TM100 while updating;

 

2015-8-20 V3.14 released:
1. Add keymaker: BMW CAS4+. Models: Fxx, 2013 or later;
2. Fix BMW CAS4;
3. Bugs fix;


Notes:
This version includes firmware 1 update. Please DO NOT disconnect PC with TM100 while updating;

 

2015-7-21 V3.09 released:
1. Add keymaker: China vehicle, Delphi Immobox, 93C66, ID48. Models: GreatWall Hover,Wingle,Voolex C10,C20,C30,V200,V240,X240, ZhongHua;
1. Bugs fix;

Notes:
EEPROM is 93C66B, SOT-23. You can read it by XProg using Microchip 93xx66B. The wire schematic from 6-PIN to 8-PIN can be got from technical support;
 
  
2015-7-13 V3.08 released:
1. Add keymaker:SAAB, MC68HC05X32. Models: before MY2003, 9-3, 9-5, Twice;
2. Add keymaker:SAAB, 93C66, ID46. Models: since MY2003, 9-3, 9-5, Twice;
3. Add TPReader: SAAB, reading, T5 write to SAAB;
4. Add TPReader: TIRIS DST-128, reading;
5. Bugs fix;

Notes:
This version includes firmware 1 update. Please DO NOT disconnect PC with TM100 while updating;

 

2015-7-7 V3.07 released:

1. Add keymaker: FIAT, Magneti Marelli dashboard, 95160 SMD8, ID48. Models: Palio, Siena, Strada, Uno 2010;
2. Add key precode: FIAT, VDO dashboard, 24C16, ID48(need diagnostic tool learn key). Models: Palio, Siena, Strada, Uno 2010;
3. Add keymaker: Piaggio, Magneti Marelli MIU G3, 95320, ID11. Models: Vespa 125;
4. Add keymaker: Piaggio, IAW ECH, MC68HC11F1, ID11. Models: X9 500IL;
5. Add keymaker: KTM bikes immobox ZADI, 24C04, SSOP8 package, 4D60. Models: 690, 990, 1190;
6. Improve keymaker menu display style: Free modules and purchased modules displayed normal, payable modules displayed in red;

 

2015-7-1 V3.06 released:
1. Add MED9.1 PIN, CS Viewer (NOTE: INTERNET ACCESS IS MANDATORY);
2. Bug fix: Nissan Armada, Juke 93C66;
Notes:How to view MED9.1 PIN, CS: Select Tools, Dump Editor, VAG, MED9 (Flash + 95160), then load flash and EEPROM file, TM100 will display PIN and Component Security Byte. Flash file size: 2M bytes, EEPROM file size: 2K bytes.

 

2015-6-23 V3.05 released:
1. Unlock new CN2 chip manually;

Notes:
Only page 1,2,3,4 can be unlocked. Other pages impossible;

How to unlock:
Select TPReader, click "TIRIS 4D", put new CN2 chip into coil, click any "Unlock" button, all 4 pages should be unlocked;
 
2015-6-16 V3.04 released:
1. Unlock new CN2 chip for 4D copy;
2. Bug fix: Subaru XV, DST80, read page 1 before write;
3. Bug fix: can not generate TP transponder for some ID48;
4. Bug fix: 4E write failed;

Notes:
This version includes firmware 2 update. Please DO NOT disconnect PC with TM100 while updating;
 
2015-6-8 V3.03 released:
1. Add support for new CN2 chip;
2. Bug fix: Copy HITAG2 with crypt key not readable;
3. Software update even if device disconnected;

Notes:
This version inclues firmware 1 update. Please DO NOT disconnect PC with TM100 while updating;

 

2015-5-6 V3.01 released:
1. Add function: Clone TIRIS 4D, HITAG2;
2. Add keymaker: Subaru XV, DST80;
3. Bug fix: Keymaker for Toyota smart dump;
4. Bug fix: HDS PCM code calculator;

Notes:
This version inclues firmware update. Please DO NOT disconnect PC with TM100 while updating;

How to clone TIRIS 4D:
1.Select Tools, Clone, Tiris 4D;
2.Connect TM100 key cloner to PC;
3.Put original key into coil of TM100 key programmer to decode;
4.If decode success, put YS01/TPX2/EH2 transponder into coil of TM100 key programmer;

How to clone HITAG2:

1.Select Tools, Clone, PCF7936;
2.Collect signature data: put sniffer antenna of TM100 key cloner near ignition, turn ignition on by original key.If collect success, red LED will blink once. If not, collect data again.;
3.Connect TM100 key cloner to PC;
4.Put original key into coil of TM100 key programmer to decode;
5.If decode success, put YS21/GMT46 transponder into coil of TM100 key programmer;

 

2015-3-20 V2.10 released:
1. Add function: Searching of the 7th byte by existing key for VAG (MEGAMOS48);
2. Bug fix: Keymaker for Honda bike 93C46;
3. Bug fix: Keymaker for Kawasaki Denso 21175-0811;
4. Bug fix: Keymaker for Fiat Seicento 93c56 exit while loading dump;
5. Bug fix: Keymaker for BMW CAS1;
6. Bug fix: TP22,23,24,25;
7. Add current and expired time tip at online activation dialog;
8. Bug fix: MEGAMOS48 verify not stable;

How to search the 7th byte for VAG:
1.Select TPReader, click "MEGAMOS 48", click button "Search 7th CS";
2.Input 6-byte component security, select brand, put working key into coil;
3.Click button "Search".

Notes:
This version inclues firmware update. Please DO NOT disconnect PC with TM100 while updating;

 

 2015-3-13 V2.9 released:
1. Bug fix:Some keymaker for Toyota 4C not work;
2. Add key unlocker for BMW CAS;
3. Add key unlocker for Passat B6 HITAG2;
4. Add sub menu for view new feature;

How to unlock key for BMW:
1. Select Tools, Unlocker, BMW, Unlock HITAG by CAS dump;
2. Open CAS dump file, put key to be unlocked into coil and click button "Unlocker";

How to unlock key for VW, Passat B6:
1. Select Tools, Unlocker, VW, Passat B6, Comfort Module, Unlock HITAG by 95320;
2. Open 95320 dump file, put key to be unlocked into coil and click button "Unlocker";
 
2015-3-3 V2.8 Released:
1. Bug fix: BMW CAS3+ all key lost key maker by ECU dump;
2. Bug fix: Some types TEMIC 11 reading;
3. Add disable key position for BMW;
Note:This version inclues firmware update. Please DO NOT disconnect PC with TM100 while updating.
How to disable key position for BMW:
1. Select Tools, Dump Editor, BMW, disable key position;
2. Open CAS dump file, select key position to be disabled. Click button "Disable key position", and write back new generated file to CAS;
 
2015-1-28 V2.7 Released:
1. Bug fix: BMW CAS4(5M48H);
2. Bug fix: Mitsubishi Carisma 93C56;

 

TM100 V2.6 Released

1.Add keymaker for Honda,Jazz,2008...(93C66).
2.Add keymaker for Isuzu,D-Max,2010-(93C66)
3.Add keymaker for Isuzu,KB250 Diesel,(93C66,4D)
4.Add keymaker for Kawasaki,Denso,Part No. 21175-0272
5.Add keymaker for Kawasaki,Denso,Part No. 21175-0811
6.Add keymaker for KIA,Soul,2008-(T1766)
7.Add keymaker for Mitsubishi,Fuso Canter,2009-(93C66,4D)
8.Add keymaker for Suzuki,SX4,2006-(HC08,ID40)
9.Add keymaker for Toyota,Yaris,2004 (93C56,4C)
10.Add keymaker for Fiat,Burstner,Viseo,2011-(95640,HITAG)
11.Add keymaker for Fiat,Ducato,2012(95640)
12.Add keymaker for Fiat,Palio,1996 (68HC705)
13.Add keymaker for Fiat Strada,1999-(93C66)
14.Add keymaker for Ford,Escape,2012(9S12)
15.Add keymaker for Ford,Focus,2012 (9S12)
16.Add keymaker for Ford,Mondeo,1993-(TMS)
17.Add keymaker for Peugeot,Boxer,2012(95640)
18.Add keymaker for Peugeot,Manager,2012(95160)
19.Add keymaker for Renault,Latitude,2010-(9S12,HITAG)
20.Add keymaker for Renault,Safrane,2010-(9S12,HITAG)
21.Add keymaker for Renault,Samsung SM5,2010-(9S12,HITAG)
22.Add keymaker for Chevrolet, Kalos, 2006-(93C56)
23.Add keymaker for Dodge,Sprinter ,2006-(9S12)
24.Add DumpEditor for Volvo CEM+ECU synchronization
25.Bug Fix : Opel, Signum, Vectra, 93C76,68HC908 remote problem

How to synchronize CEM and ECU of Volvo : Open TM100 software, select "Tools",select "DumpEditor",select Volvo, CEM+ECU, then open dialog, open CEM and ECU dump file, check and make synchronization.

 

TM100 Update Event


2014-12-22 V2.5 Released
1. Fix bugs: keymaker for Jeep LIBERTY;
2. Fix bugs: image generator tips;
 
2014-12-20 V2.4 Released
1. Add tips for key maker of MEGAMOS13, TEMIC12;
2. Fix bugs at image generator for ID44 for China vehicles;
3. Fix bugs at image generator for ID46 for Chery;
4. Fix bugs at keymaker for Mazda 6, 93C56;
5. Fix bugs at keymaker for Jeep Grand Cherokee, 68HC08;
6. Fix bugs at keymaker for Toyota Camry 4C;
7. Fix bugs at keymaker for Roewe 750;
8. Fix bugs at keymaker for VW Immobox, by part no for 377 953 257 A (93C56);
9. Improve calculator for 5-digit Nissan BCM PIN;
10. Fix bugs at keymaker for Zhonghua Zunchi 24C01;
11. Add keymaker for VW New Beetles 9S12;
12. Enable explore key for BMW CAS;
 
2014-12-4 V2.3 Released
1. NISSAN 20-digit PIN calculator added;
How to calculate:
1. Get 20-digit Pre-PIN by NISSAN C3 Plus. Open TM100 software, select "Tools", select "Calculator", then open dialog, input 20-digit Pre-PIN, click "Calculate", enjoy it!;
 
2014-11-18 V2.1 Released
1. Online calculate CS and login code for Passat B6/CC Hitag (NOTE: INTERNET ACCESS IS MANDATORY);
2. Fix bugs at copy ID8C (NOTE: INTERNET ACCESS IS MANDATORY);
 
2014-11-14 V2.0 Released
1. MEGAMOS 13: Add "Write" button to copy on T5;
2. Can copy ID13 on T5;
3. Fix bugs at copy ID8C (NOTE: INTERNET ACCESS IS MANDATORY);
4. Fix bugs at keymaker for ID13;
5. Fix bugs at keymaker for VW Gol, Immobox 93C56;
6. Fix bugs at keymaker for Daewoo Lanos, MC68HC05;
7. Online activation automatically while connecting with device;
8. Online license updating (NOTE: INTERNET ACCESS IS MANDATORY);
9. Online calculate CS and login code for Passat B6/CC (NOTE: INTERNET ACCESS IS MANDATORY);
10. Online decrypt data of Volvo CEM 93C86 (NOTE: INTERNET ACCESS IS MANDATORY);

Notes: This version inclues firmware update. Please DO NOT disconnect PC with TM100 while updating.


How to copy ID13 by TM100:
1. Select TPReader, click "MEGAMOS 13", put original ID13 chip into coil, click Read;
2. Put T5 into coil, click Write;

How to perform online updating license:
1. Connect your PC with internet;
2. Select Tools, click "Install New Modules";
 
2014-8-5 V1.45 Released
1. MEGAMOS48: Edit ID of cloneable chip ;
2. MEGAMOS48: Verfiy crypto key ;
3. Can copy 8C on TK5561A(Mazda, Ford Ranger and Proton cars);
4. Fix bugs at generating TP chips;
5. Fix bugs at Volvo FH12,FL250;
Notes: This version inclues firmware update. Please DO NOT disconnect PC with TM100 while
updating.

How to copy TEMIC 8C by TM100:

1. Select TPReader, click TEMIC 8C, put original 8C chip into coil, click Read;
2. Put TK5561 into coil, click Write;
 
2014-8-1 V1.44 Released
1. Add Keymaker for Toyota smart key by 93C66, 93C86.;
2. Add Keymaker for Toyota smart dump reset to virgin state;
3. Fix bug at loading A3,R8,TT VDO dump;
4. Fix bug at Rover 9S12 writing key;
 
2014-7-26 V1.43 Released
1. Add tip for programming PCF7935.;
2. Fix bug at loading Honda 24C04 dump;
3. Fix bug at generating ID67,68,70;
 
2014-7-25 V1.42 Released
1. 18 new VW models;
2. 7 new Audi models;
3. To join the BMW key information display (VIN, mileage and other information);
4. Join the calculator, used to calculate the Toyota TIS software smart card to reset your
password;
 
2014-7-14 V1.41 Released
1. Copy ID4C to CN1, CN2.;
2. Unlock CN1, CN2;
3. Generate ID67, ID68, ID70 using locked or unlocked CN1, CN2 chip;
 
2014-7-11 V1.40 Released
1. Fix bug: Can not lock CN1, CN2;
2. Fix bug: Daihatsu 93C66 4D key maker;
 
2014-4-17 V1.02 Released
1. Update firmware 1, enable PCF7952 writing EEPROM;
2. Fix Hitag2 validate bug, and add error message tip;
3. Add key maker for BMW EWS4;

Tm 100 μηχανή αντιγραφής και ανάκτησης χαμένων κλειδιών immobilizer

  • Κωδικός Προϊόντος: Tm 100
  • Διαθεσιμότητα: Διαθέσιμο